Get a quote

WPC Wall Panel Manufacturers in China: A Factory's Shortlist for Importers

By VIGOU · November 2026 · 8 min read
Wood-grain fluted WPC wall panel leaving an extrusion and film-wrapping line, with cut hollow-chamber profiles stacked in the foreground

If you're looking for a WPC wall panel supplier in China, you should know who wrote this before you read it. We're VIGOU, a wall panel factory in Linyi, Shandong, and we make WPC fluted panels ourselves. So yes, we're on the list. We'd still rather hand you nine names with a source behind every fact than another anonymous "top 10", most of which are written by a factory anyway. They just don't say so.

No ranking. No scores, no "No.1". We can't grade another plant's panels from the outside, and pretending to would waste your time. What we can do is open each company's website, read what it says about itself, and pass that on with the link.

How We Picked the Nine

Three checks. All public, so you can rerun them:

We dropped a few well-known names along the way. Some sites call the company a trading firm in their own page titles; others turned out to be mainly decking and fencing businesses, or acoustic panel specialists whose grooved boards aren't WPC at all. Plenty of decent factories are missing too, simply because they sell through agents and barely run a website.

One more rule, applied to everyone including us: no prices, lead times or compliance claims. A website can't confirm any of those for your order. A quotation and a test report can. Everything below was checked on the linked pages in November 2026 and may have changed since.

One Board, Three Names

Before the list, a small thing that causes a lot of confusion. In China the same extruded wood-plastic board gets sold as "WPC wall panel", "bamboo fiber wall panel" and "bamboo charcoal wall panel". The ribbed versions are called fluted panels, grille panels or "great wall" panels depending on who's writing the catalogue. Two quotes with different names can be the same product. Two quotes with the same name can be quite different, because the profile matters far more than the label: face width, depth, hollow or solid, and how much wall each piece really covers once it's clipped to the next one.

So compare drawings, not product names. You'll see that theme again below.

The Nine at a Glance

CompanyBasePublished on its own site
VIGOU (Shandong Weigao Board)Linyi, ShandongSince 2019; 7 fluted profiles, 150–210 mm wide
Linyi Jiabang International (Garbon)Linyi, ShandongSince 2002; 20,000 m² plant
Shandong Laimeng New MaterialsLinyi, Shandong12 years of export; 40+ production lines
Linyi Bennet Wood IndustryLinyi, ShandongSince 2008; 200 km from Qingdao Port
COOWINQingdao, ShandongSince 2000; interior WPC focus
SONSILLHaining, ZhejiangSince 2015; 100+ production lines
Haining Lisheng Decoration MaterialHaining, Zhejiang20 production lines; indoor materials
GreenzoneFoshan, GuangdongSince 1999; interior WPC profiles from 2003
CNWALLChengdu, Sichuan15+ years; 100+ production lines

Linyi, Shandong

Four of the nine are in Linyi. That's not a coincidence: it's a wood and decorative board city, and Bennet's own site calls it the capital of China's wood industry. It's also where we are, so we'll start with ourselves and try to keep it honest.

VIGOU (Shandong Weigao Board Co., Ltd.)

That's us. Founded in 2019, with a 50,000 m² factory and 50 production lines. We extrude our WPC wall panels from bamboo-wood fibre on our own lines and only make the fluted kind, in seven profiles: half-round 150 × 15 mm, square-hole 150 × 17, round-hole 150 × 17, solid micro-fluted 159 × 8.5, six-groove 170 × 22, concave 204 × 10 and an acoustic fluted profile at 210 × 12 with a perforated back and acoustic backing. Standard lengths are 2,440, 2,600, 2,800 and 3,000 mm. Faces are film-wrapped wood grain or solid colour, and each profile has its own photo gallery of real finishes. We're younger than most companies here. If you need decking, fencing or exterior cladding, we're the wrong call; we don't make them.

Seven WPC fluted wall panel cross-sections stacked and labelled A to G, from a 150 × 15 mm half-round profile to a 210 × 12 mm acoustic fluted profile

Linyi Jiabang International Co., Ltd. (Garbon)

Founded in 2002, so it's one of the older WPC names in Linyi. The home page lists a 20,000 m² plant and 60 "product lines", along with a daily output figure in metres. The range is broad: indoor WPC wall panels, bamboo-fibre wall panels, grille panels, integrated door, cabinet and wall systems, plus SPC flooring and flexible stone. Recent news posts on the site describe an expanded fluted panel range with wood-grain and marble finishes. Good if you want one supplier for several categories; ask which of them come off its own lines. Source: Jiabang, home page.

Shandong Laimeng New Materials Co., Ltd.

Also Linyi. The About page gives 12 years of export experience, more than 40 production lines and a factory area of 20,000 m², and it describes the company as focused on interior wall decoration. WPC wall panels sit alongside PVC marble sheet, PS wall panels and PS mouldings. That mix suits a distributor who sells a whole feature-wall package (panel, sheet and trim) rather than WPC alone. Source: Laimeng, About Us.

Linyi Bennet Wood Industry Co., Ltd.

Founded in 2008. The site places Bennet 200 km from Qingdao Port and describes a 2,000 m² production base with CNC machines and platen presses, which is small next to the other figures here. Its page titles lead with interior WPC wall panels, and the range adds sound-absorbing panels, ceilings and floors. Worth a look for smaller mixed orders; for a large single-profile programme, ask how much of the volume is made on site. Source: Bennet, About Us.

Elsewhere in Shandong: Qingdao

COOWIN

Headquarters in Pingdu Industrial Park, Qingdao. The company says its WPC factory was set up in 2000 with production technology from the USA, and that COOWIN International was registered in 2006. The home page adds 500 staff and sales to 90 countries and regions. Unlike several names here, COOWIN is firmly indoor: fluted WPC wall panels, ceilings, baseboards and timber tubes, with MDF, PU stone and acoustic panels added more recently. Being near Qingdao Port is handy for freight. Sources: COOWIN, Why COOWIN and home page.

Haining, Zhejiang

Haining is better known for PVC ceilings and panels, which is exactly why these two belong on the list: WPC arrived there as an extension of PVC extrusion.

SONSILL

Founded in 2015 in Haining. The About page claims 100+ production lines and four product groups under one roof: interior WPC (59 SKUs at the time we checked), PVC shower panels, co-extruded exterior cladding, and acoustic and wood veneer panels. Interior WPC leads the site. One listed fluted panel measures 160 mm wide, 24 mm thick and 2,900 mm long, a deeper rib than most standard profiles. Sources: SONSILL, About and 160 × 24 mm fluted panel.

Haining Lisheng Decoration Material Co., Ltd.

Lisheng describes growing from 10 to 20 production lines and says its focus is indoor decoration material. WPC panels are one item in a list that's mostly PVC: wall and ceiling panels, folding doors, flooring, profiles and foam wall stickers. Named markets are the Middle East, Eastern Europe, Africa and South America. If WPC is your main line, ask how many of those 20 lines run it. Source: Lisheng, About Us.

Hotel reception with a full-height wood-grain fluted wall behind a grey stone desk, lit by a warm light strip along the ceiling

Further Afield

Greenzone (Foshan Greenzone New Construction Materials Co., Ltd.)

The longest history here. Greenzone's timeline starts in 1999 as a PVC door factory, creates the Greenzone brand and launches interior WPC profiles in 2003, adds a production base in Chaozhou in 2014 and opens a European operations centre in Berlin in 2022. The contact page gives a Foshan address. A large share of the current range is decking and other exterior products, so treat it as a broad composite company with an interior line, not an interior specialist. Sources: Greenzone, About Us and contact page.

CNWALL

Chengdu, Sichuan. The home page states 15+ years of manufacturing, 100+ production lines, a 100,000 m² factory and 800,000 m² of monthly capacity, the biggest published numbers on this list. WPC fluted panels share the range with bamboo fibre, carbon crystal, SPC and PVC panels. Its WPC page lists the same four lengths we use (2,440 to 3,000 mm) and splits surface films by type: PVC film for wood, marble, fabric and solid colours, PETG and PET for gloss and metallic looks. Chengdu is a long way inland, so get freight to your load port quoted properly. Sources: CNWALL, WPC fluted wall panels and home page.

What the List Tells You

Three things stand out once the nine are side by side.

First, most of these companies don't only make WPC wall panels. Some lean towards PVC sheet, some towards decking, some towards acoustics. That's normal, but it means "WPC wall panel manufacturer" on a home page tells you less than the product page does. Ask which profiles run on their own extruders and which are bought in.

Second, published capacity is a claim, not an audit. Ours too. A "production line" can mean an extrusion line, a film-wrapping line or a cutting station, and nobody on this list defines it. Use the figures as questions.

Third, fluted panels bring their own trade-offs: grooves catch dust, profiles are directional, and joints need planning before you order. We've written those up separately in the disadvantages of fluted wall panels, which is worth sharing with installers before a first order.

Importer's Verification Checklist

Whoever ends up on your shortlist, run the same checks. Our guide to choosing a wall panel supplier in China covers each one in depth; here's the short version.

Three samples from three factories on one bench will teach you more than any list. This one included.

Add VIGOU to Your WPC Comparison

Tell us the profile, length, finish and destination port you're comparing. We'll send drawings and samples you can test next to your other shortlisted suppliers.

Request Samples & a Quote →

Frequently Asked Questions

Is this list of WPC wall panel manufacturers independent?

No. VIGOU wrote it and VIGOU is one of the nine companies on it. Every other entry is based on that company's own website, and the pages are linked so you can check them yourself. Read it as a starting list from a competitor, not a neutral review.

Where are WPC wall panels made in China?

On this shortlist, four of the nine companies are in Linyi, Shandong, and two are in Haining, Zhejiang. The rest are in Qingdao, Foshan and Chengdu. That is only this list, not a census of the industry, but Linyi and Haining are the two names an importer will hear most often.

Are WPC wall panel, bamboo fiber wall panel and fluted wall panel the same thing?

Often, yes. Many Chinese factories extrude the same wood-plastic composite board and sell it as WPC wall panel, bamboo fiber wall panel or bamboo charcoal wall panel, and the ribbed versions as fluted or grille panels. Ask for the cross-section drawing and the material description in writing rather than relying on the name.

What should I ask a Chinese WPC wall panel supplier first?

Ask for the profile drawing: face width, depth, hollow or solid section, and the effective coverage per piece. Then ask for the standard lengths, the surface film options and the weight per piece. Those answers tell you whether two quotes are for the same product before you compare anything else.